PM-200S
MOTORIZED GATES
Elegant bidirectional swinging gate with suitable width dimensions for the passage of people with reduced mobility or for emergency and evacuation exit. The barrier normally remains closed and once it receives the opening order through a remote push button or validation reader, the barrier automatically swings in the direction of passage. Once access has taken place, it closes again according to a timer. This model is suitable for indoors installations always controlled by security personnel.
Validation
- Remote push-button operated equipment or any type of validation system, located on a possible additional pedestal.
- Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/ IP protocol available.
Passage
- Motorized operation, with automatic timed closing.
- Bidirectional passage control.
- Single or double version available, depending on model.
Security
Safety system to prevent the panel from being hit in the event of obstruction of the panel rotation before the end of its cycle. Anti-panic system, with door release in case of emergency.
ManuFacturing
Pedestal made of 1.5 mm thick AISI-304 or AISI-316 stainless steel.
Gate with 10 mm thick security glass swing panel of different heights, depending on the model. (see versions).
Central tube housing the mechanism, brushless motor and electronics. Part of the structure is removable for installation and maintenance tasks.
Electronics
Universal power range (100 – 240 VAC 50/60 Hz).
Easy configuration of the main parameters of the equipment through switches. Firmware upgradeable for new features
Installation
The gate is supplied disassembled and its central post must be fastened to the floor with screws and chemical anchors or through the recessed base. The cables all enter through this base.
SaFEty conditions
It has an anti-panic system which, in the event of a power cut, unlocks the glass panel and can be pushed manually in either direction, leaving the passageway free in both directions without obstacles.
oPEration
Once the access gate has been opened in either of the access directions, the glass panel initiates the rotation automatically, allowing access at a normal walking speed.
Once the opening is close to 90o, the panel returns to its closed position according to the timer.
to bE ProVidEd by thE buyEr
- Electrical power supply.
- Electrical wiring for power supply, command and control.
- Adequacy of the floor where it is to be installed.
Validation
- Remote push-button operated equipment or any type of validation system, located on a possible additional pedestal.
- Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/ IP protocol available.
Passage
- Motorized operation, with automatic timed closing.
- Bidirectional passage control.
- Single or double version available, depending on model.
Security
Safety system to prevent the panel from being hit in the event of obstruction of the panel rotation before the end of its cycle. Anti-panic system, with door release in case of emergency.
ManuFacturing
Pedestal made of 1.5 mm thick AISI-304 or AISI-316 stainless steel.
Gate with 10 mm thick security glass swing panel of different heights, depending on the model. (see versions).
Central tube housing the mechanism, brushless motor and electronics. Part of the structure is removable for installation and maintenance tasks.
Electronics
Universal power range (100 – 240 VAC 50/60 Hz).
Easy configuration of the main parameters of the equipment through switches. Firmware upgradeable for new features
Installation
The gate is supplied disassembled and its central post must be fastened to the floor with screws and chemical anchors or through the recessed base. The cables all enter through this base.
SaFEty conditions
It has an anti-panic system which, in the event of a power cut, unlocks the glass panel and can be pushed manually in either direction, leaving the passageway free in both directions without obstacles.
oPEration
Once the access gate has been opened in either of the access directions, the glass panel initiates the rotation automatically, allowing access at a normal walking speed.
Once the opening is close to 90o, the panel returns to its closed position according to the timer.
to bE ProVidEd by thE buyEr
- Electrical power supply.
- Electrical wiring for power supply, command and control.
- Adequacy of the floor where it is to be installed.
Data sheet
| Concepto | Valor |
|---|---|
| Material | AISI 304 or 316 Stainless Steel |
| Power supply | 100-240 VAC 50/60Hz |
| Working voltage | 24 VDC |
| Operating temperature | -10º a + 50º |
| Maximum Consumption / Rest | 80 W |
| Humidity | 90% |
| Net weight | 50 kg |
| Security level | Deterrent |
* El Consumo Máximo indicado no tiene en cuenta accesorios opcionales.
CABINET ADAPTATIONS
Customizable panel length up to the recommended limits.
Possibility of painting the equipment in different colours according to RAL chart.
PROTECTION FOR AGRESSIVE ENVIRONMENTST
This is the only way to guarantee the correct operation of the equipment outdoors. Exterior Sealing.
Electronics protection.
Outdoor protective canopy.
AISI 316 stainless steel for outdoor and indoor environments where humidity, salinity and/or corrosion are present
SECURITY
Emergency battery kits
COMPLEMENTS
- Console with pushbuttons and/or switches for remote control and control of the passage directions.
- Posts or totems to house validation systems and/or pictograms.
- Fixed or removable handrails for enclosing or forming walkways.
PM-200S
BLUEPRINTS
Popover content