PCO-RSV7

Sliding Gates

Smart and touchless gate composed of two cabinets with conceala- ble sliding panels. Once the equipment receives the opening order, it slides its panels towards the inside of the cabinet allowing the user to pass through, and closing again once the passage has been completed. Its great functionality and low maintenance, make it especially suitable for controlling enclosures with large numbers of people located indoors with minimal surveillance or very well protected exteriors.

Validation

  • Compatible with any type of validation system.
  • Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/IP protocol available.

Passage

  • Motorized Operation

  •  Bidirectional control of passage.

Security

  • Anti-panic system, with door opening in case of emergency.
  • Security photocells prevent the panel from closing and hitting the user while he/she is in the corridor.
  • It also detects intrusions by unidentified persons via acoustic alarm signals.

MANUFACTURiNG

  • Cabinet made of AISI-304 or AISI 316 stainless steel, 1.5 mm thick and satin finish.
  • Cabinet structure with suitable measurements to house validation readers, as well as control elements or pictograms, among others.
  • Electromechanical assembly comprising: Brushless motor, worm gear speed reducer, greased for life.
  • Swing tempered glass barriers.
  • The equipment has security locks and side doors and covers to facilitate access, maintenance and installation

ELECTRONiCS

  • Universal power supply range. (100- 240 VAC 50/60 Hz).
  • Easy configuration of the main parameters of the equipment via switches.
  • Upgradable firmware for new functionalities.

SAFETY CONDiTiONS

In case of emergency, it has a system with an anti-panic system that unlocks the panels

when there is a power cut, which slide and conceal themselves inside the cabinet, leaving

the passage free and unobstructed for a massive evacuation of the enclosure.

Special measures are available to facilitate the passage of people with reduced mobility or wheelchair users.

This unlocking manoeuvre can also be carried out remotely. .

INSTALLATiON

The equipment is supplied fully assembled and is fixed to the floor using the base plate

and screws with expansion plugs. Cable entry is through the base of the unit.

The access gates must be interconnected so the corresponding connection duct must be

planned for.

OPERATiON

Each passage allows for different modes of operation. The most significant are:

a. Free access.

b. Controlled access, with electric opening by any type of validation system.

c. Closed access.

TO BE PROViDED BY THE BUYER

  • Electrical power supply.

  • Electrical wiring for power supply, command and control.

  • Adequacy of the floor where it is to be installed.

  •  Connection between cabinets for wiring.

Validation

  • Compatible with any type of validation system.
  • Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/IP protocol available.

Passage

  • Motorized Operation

  •  Bidirectional control of passage.

Security

  • Anti-panic system, with door opening in case of emergency.
  • Security photocells prevent the panel from closing and hitting the user while he/she is in the corridor.
  • It also detects intrusions by unidentified persons via acoustic alarm signals.

MANUFACTURiNG

  • Cabinet made of AISI-304 or AISI 316 stainless steel, 1.5 mm thick and satin finish.
  • Cabinet structure with suitable measurements to house validation readers, as well as control elements or pictograms, among others.
  • Electromechanical assembly comprising: Brushless motor, worm gear speed reducer, greased for life.
  • Swing tempered glass barriers.
  • The equipment has security locks and side doors and covers to facilitate access, maintenance and installation

ELECTRONiCS

  • Universal power supply range. (100- 240 VAC 50/60 Hz).
  • Easy configuration of the main parameters of the equipment via switches.
  • Upgradable firmware for new functionalities.

SAFETY CONDiTiONS

In case of emergency, it has a system with an anti-panic system that unlocks the panels

when there is a power cut, which slide and conceal themselves inside the cabinet, leaving

the passage free and unobstructed for a massive evacuation of the enclosure.

Special measures are available to facilitate the passage of people with reduced mobility or wheelchair users.

This unlocking manoeuvre can also be carried out remotely. .

INSTALLATiON

The equipment is supplied fully assembled and is fixed to the floor using the base plate

and screws with expansion plugs. Cable entry is through the base of the unit.

The access gates must be interconnected so the corresponding connection duct must be

planned for.

OPERATiON

Each passage allows for different modes of operation. The most significant are:

a. Free access.

b. Controlled access, with electric opening by any type of validation system.

c. Closed access.

TO BE PROViDED BY THE BUYER

  • Electrical power supply.

  • Electrical wiring for power supply, command and control.

  • Adequacy of the floor where it is to be installed.

  •  Connection between cabinets for wiring.

Data sheet

ConceptoValor
Material BodyAISI 304 or 316 Stainless Steel
Power supply100-240 VAC 50/60Hz
Working voltage24 VDC
Circuit Breaker6A
Operating temperature-15º a + 50º
Maximum Consumption / Rest300 W
Humidity90%
Net weight178 Kg.
Security levelMedium / High
Millions of cycles between failuresUp to 10 M

* El Consumo Máximo indicado no tiene en cuenta accesorios opcionales.

CABINET ADAPTATIONS

  • Adaptation of readers on the surface or inside the cabinet, depending on its dimensions and characteristics.
  • Possibility of making adaptations to the cabinet, according to the customer’s needs.

VISIBILITY AND AESTHETICS

  1. Indicative pictograms.
  2.  Front pictograms.
  3.  LED strips.
  4. Top cover available in different materials.

Possibility of painting the equipment in different colours according to RAL chart.

  1. Top cover available in different materials.

 

SECURITY

  1. Customization of the height of the panels up to 1600 mm.
  2. Emergency battery kits.

PROTECTION FOR OUTDOORS

PCO-RSV7 is the recommended modell for outdoos,which is already equipped with external sealing and a thermal manager, which are necessary to guarantee the correct operation of the equipment outdoors.

1. Outdoor protective canopy.

2. AISI 316 stainless steel for outdoor and indoor environments where humidity, salinity and/or corrosion are present.

COMPLEMENTS

See accessories section in the general catalogue

• Capacity control systems integrated in the equipment itself or through software.

• Passage counters, card-swallowing mailboxes and command and control consoles.

• Posts or posts.

• Fixed or removable railings for enclosing or forming walkways.

PCO-RSV7

BLUEPRINTS