railings
Separator railings made of stainless steel tube to close off a row of turnstiles or to support the reflectors for the units with photoelectric cells. There are two different types, depending on whether they are fixed or removable (by simply pulling the railing upwards).
FIXED RAILINGS
Fixed to the floor using 10 mm diameter screws and expanding raw plugs. There are two versions:
. AG-31 Mixed manufacturing stainless steel tubing and glass.
REMOVABLE RAILINGS
Floor support system using bases that can be screwed down or set into the floor. Their characteristics are the same as for the fixed versions.
.AG-28 EXE / AG-29 EXE: With base plate fixed to the floor.
. AG-28 EXD / AG-29 EXD: With base plate set into the floor.
SPECIAL RAILINGS
AP110BAR: Composite construction using stainless steel tubing and transparent polycarbonate sheets in the central part.
PM500BAR: Composite construction using stainless steel tubing and transparent polycarbonate sheets in the central part.
Barandas Fijas AG-28
Barandas Fijas AG-29
Barandas Fijas AG-30
Barandas Fijas AG-31
Barandas Especiales AP110BAR
Barandas Especiales PM500BAR
BT-05
Pedestal of automobile height, manufactured in stainless steel AISI 304 or AISI-316 mechanized to hold standard readers. (For inside or outside installa- tion).
BT-06
Supporting pedestal for card readers, manufactured in stainless steel AISI 304 or AISI-316 mechanized to hold standard readers. (For inside installations).
BT-07
Supporting pedestal for card readers, manufactured in stainless steel AISI 304 or AISI-316 mechanized to hold standard readers. (For inside installations).
BT-08
Supporting pedestal for card readers, manufactured in stainless steel AISI 304 or AISI-316 mechanized to hold standard readers. (For inside installations)
BC-10
Pedestal mixed height (truck / car), manufactured in stainless steel AISI 304 or AISI-316, and mechanized to hold standard readers. (For inside or outside installation).
PT-01
Standard pillar for the closure of spaces, manufactured in stainless steel tube AISI-304 or AISI- 316 with a diameter of 50 mm
PT-02
Standard pillar for the closure of spaces, manufactured in stainless 84 steel tube AISI-304 or AISI- 316 with a diameter of 80 mm
PT-03
Special pillar for the closure of spaces, manufactured in stain- less steel AISI-304 or AISI-316 with a diameter of 150 mm..
PT-04
Pedestal with the function of proximity bracket or magnetic cards reader, manufactured in stainless steel AISI 304 or AISI-316.
PT-05
Pedestal for support simple reader and pictogram indicative (pictogram not included), manufactured in stainless steel AISI 304 or AISI-316.
PT-06
Special Pedestal (design type PM-600S) reader bracket simple, depen- ding on the reader can also to adapt a pictogram (not included), manufac- tured in stainless steel AISI 304 or AISI-316.
PT-07
Rectangular tube pedestal manufactured in stainless steel AISI-304 o 316, which supports a head, in which, there is the folding mechanism that closes and folds with a power cut made from a switch whose signal receives from the turnstile.
entry counter
For counting steps through a turnstile. It can be manually reset using a pushbutton or a key.
Characteristics:
. 8 digits impulse totalizing counter.
. 7,4 mm height liquid crystal display.
. Powered by 2 x 1,5 V replaceable batteries.
. 2 LR 1 type alkaline batteries (2 x 1,5 V) with a 3-year duration. . Operating temperature: -10o C to +50o C.
. Atmospheric humidity: 80% No condensation.
. Push button to reset.
led STRIPS
Signaling elements with high luminosity LED strips marking with green color when the passage is unlocked or open and with red color when the passage is blocked or closed.
Pictograms
•Mod.: Standard PCTXX. Function indication:
Signaling elements with high brightness leds, which show a green arrow when the passa- ge is unlocked or opened, or a red cross when the passage is closed or blocked.
•Mod.: Information PCTXL. Situation indication:
Information elements with high brightness leds showing a green arrow when the passage is open, or a red cross when it is closed. They can be fifitted on each of the sides of a unit to be viewed frontally.
Alarms
System for detecting unauthorized access over or under the arms of
a tripod turnstile. It consists of a group of infrared cells connected to a special discriminator circuit that creates a “curtain” of active protection in the lower and the upper parts of the turnstile. If this protective system is invaded without the necessary authorization, an optical and acoustic alarm signal is emitted.
The upper cover of some tripod turnstile models can be fitted with pressu- re sensors so that if a user forces down on it to jump over the barrier, an alarm signal is also produced.
This system can only be installed on the tripod turnstile models TR-8208 and TR-8213S.
- Entry under the arms. The turnstile is equipped with a system of photocells that detect unauthorized entry under the tripod arms. The system detects the presence of the person passing below the arms and emits an acoustic alarm.
- Entry over the arms. The photocell system can detect an unauthorized entry over the tripod arms. The system detects the presence of . the person passing above the arms and emits an acoustic alarm
- Another optional alarm system. The turnstile is equipped with a pres- sure system in the cover. When the user forces down on the top of the cover in order to jump over, an acoustic alarm signal is activated.
capacity control system
System designed to control all the time the number of people who are inside, with the possibility of regulating the number of steps and control the flow of people, according to the program that has been established
CAAR:
– Control software designed for PC (O.S. Windows)
– Some controllable areas, interconnected between them. (max. 250 equipments).
– Remotely control of the equipments.
– Advanced capacity control system.
– List.
– SQL database.
DISAR:
– Control software designed for PC (O.S. Windows) – One controllable area (max. 32 equiments).
– Remotely control of the equipments.
– Simple capacity control system.
– Control schedule activity devices of step control (not for people)
Integrated capacity control:
-Software integrated in the equipment. Not necessary PC or Tablet.
– One controllable area (max. 16 equipments).
– Simple capacity control system. Display with inputs, outputs and currently capacity.
– Configurable by keyboard and display.
control consoles
Desktop console (normally made of plastic) in which control pushbuttons and/or control switches of one or several units are installed.
The direction of passage (entry and exit) can be unblocked from the console, and in an emergency situation the turnstile tripod arms can be dropped down.
control consoles
TOKENS
Control devices that permit entry when a token is inserted. They are equipped with internal container for collection of the tokens.
COIN BOX
Control devices that permit entry when an amount of legal tender coin has been inserted. They are equipped with an internal container for collection of the money. They do not give change or admit paper money. This system can only be integrated into the TR-8213S, TR- 8214S tripod turnstile models and automatic gates.
adaptation of card reader
All ARGUSA equipments are prepared for the installation of different card readers depending on the model, the reader to integrate and the dimensions.