PM-500S

MOTORIZED GATES

Smart and touchless gate composed of one single cabinet with a bidirectional panel, ideal for people with reduced mobility or wheel- chair users. Once the gate receives the opening order, it swings its panels towards the inside of the cabinet allowing the user to pass through, and closing again once the passage has been completed. This model is especially suitable for indoors with minimal surveillance or very well protected exteriors

Validation

  • Compatible with any type of validation system.
  • Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/IP protocol available.

Passage

  • Motorized Operation
  • Bidirectional control of passage.

Security

  • Security photocells prevent the panel from closing and hitting the user while he/she is in the corridor. It also detects intrusions by unidentified persons by means of acoustic alarm signals.
  • Anti-panic system, with door opening in case of emergency.

ManuFacturing

  • Cabinet made of AISI-304 or AISI 316 stainless steel, 1.5 mm thick and satin finish.
  • Cabinet structure with suitable measurements to house validation readers, as well as control elements or pictograms, among others.
  • The equipment has security locks and side doors and covers to facilitate access, maintenance and installation.
  • Electromechanical assembly comprising: Brushless motor, worm gear speed reducer, greased for life.

ElEctronics

  • Universal power supply range. (100- 240 VAC 50/60 Hz).
  • Easy configuration of the main parameters of the equipment via switches.
  • Upgradable firmware for new functionalities.

Installation

The equipment is supplied fully assembled and is fixed to the floor using the base plate and

screws with expansion anchor. Cable entry is through the base of the unit.

When several units are installed, the passages are formed by the access gate units them- selves. It should be taken into account that at the end of the run a railing must be fitted to support the last access gate cell reflectors.

saFEty conditions

In case of a power cut, the barrier panel unblocks allowing upwards of 20 kg free exit. There is an electrical anti-panic system that automatically opens the panel in the event of a power cut, leaving the space clear for an evacuation.

oPEration

Each passage allows for different modes of operation. The most significant are: a. Free access.

b. Controlled access, with electric opening by any type of validation system.

c. Closed access.

to bE ProVidEd by thE buyEr

  • Electrical power supply.

  • Electrical wiring for power supply, command and control.

  • Adequacy of the floor where it is to be installed.

Validation

  • Compatible with any type of validation system.
  • Possible operation via dry contacts, via RS232, RS485 ModBus and Ethernet. TCP/IP protocol available.

Passage

  • Motorized Operation
  • Bidirectional control of passage.

Security

  • Security photocells prevent the panel from closing and hitting the user while he/she is in the corridor. It also detects intrusions by unidentified persons by means of acoustic alarm signals.
  • Anti-panic system, with door opening in case of emergency.

ManuFacturing

  • Cabinet made of AISI-304 or AISI 316 stainless steel, 1.5 mm thick and satin finish.
  • Cabinet structure with suitable measurements to house validation readers, as well as control elements or pictograms, among others.
  • The equipment has security locks and side doors and covers to facilitate access, maintenance and installation.
  • Electromechanical assembly comprising: Brushless motor, worm gear speed reducer, greased for life.

ElEctronics

  • Universal power supply range. (100- 240 VAC 50/60 Hz).
  • Easy configuration of the main parameters of the equipment via switches.
  • Upgradable firmware for new functionalities.

Installation

The equipment is supplied fully assembled and is fixed to the floor using the base plate and

screws with expansion anchor. Cable entry is through the base of the unit.

When several units are installed, the passages are formed by the access gate units them- selves. It should be taken into account that at the end of the run a railing must be fitted to support the last access gate cell reflectors.

saFEty conditions

In case of a power cut, the barrier panel unblocks allowing upwards of 20 kg free exit. There is an electrical anti-panic system that automatically opens the panel in the event of a power cut, leaving the space clear for an evacuation.

oPEration

Each passage allows for different modes of operation. The most significant are: a. Free access.

b. Controlled access, with electric opening by any type of validation system.

c. Closed access.

to bE ProVidEd by thE buyEr

  • Electrical power supply.

  • Electrical wiring for power supply, command and control.

  • Adequacy of the floor where it is to be installed.

Data sheet

ConceptoValor
MaterialAISI 304 or 316 Stainless Steel
Power supply100-240 VAC 50/60Hz
Working voltage24 VDC
Operating temperature-10º a + 50º
Maximum Consumption / Rest80 W
Humidity90%
Net weight50 kg
Security levelDeterrent
Steps per minuteup to 25

* El Consumo Máximo indicado no tiene en cuenta accesorios opcionales.

CABINET ADAPTATIONS

  1. Adaptation of readers on the surface or inside the cabinet, depending on its dimensions and charac- teristics.
  2. Possibility of making adaptations to the cabinet, according to the customer’s needs.
  3. Customizable panel length up to the recommended limits.

VISIBILITY AND AESTHETICS

1. Indicative pictograms.

2. Front pictograms.

3. LED strips.

4. Top cover available in different materials. Possibility of painting the equipment in different colours according to RAL chart.

TO BE CONSIDERED

PM500BAR and PM-505BAR

Railings to be used as the final closure of a battery of gates so that it can support the reflectors of the photocell.

SECURITY

Emergency battery kits.

PROTECTION FOR OUTDOORS

1. Exterior Sealing.

2. Electronics Protection.

3. Thermal Management System.

4. Outdoor protective canopy

5. AISI 316 stainless steel for outdoor and indoor environments where humidity, salinity and/or corrosion are present.

COMPLEMENTS

See accesories section in the general catalogue

  • Capacity control systems integrated in the equipment itself or through software.
  • Passage counters, card-swallowing mailboxes and command and control consoles.
  • Posts or totems.
  • Fixed or removable railings for enclosing or forming walkways.

PM-500S

BLUEPRINTS